Quality products manufactured in the United States of America
American-made hand tools from US makers · 47 products
A compact lockback with an AUS 8 stainless hawkbill blade, reversible thumb stud for one-handed open...
A metal-body retractable box cutter with a rubber grip that accepts standard 2-, 3- and 4-notch util...
A lightweight 1.5-ounce lockback with a 2-3/4" 420HC stainless blade, thumb studs on both sides for ...
Part of Case's small lockback family, the Mini Blackhorn has a locking drop point blade of Tru-Sharp...
A tiny 1-ounce slip joint with a 1-1/2" taper-ground drop point blade of high carbon stainless steel...
A featherweight 0.8-ounce lockback with a 2-1/4" hollow-ground clip point blade of high carbon stain...
One-piece forged solid steel curved claw hammer with 16 oz head, smooth face, and blue Shock Reducti...
One-piece forged solid steel curved claw hammer with 12 oz head, smooth face, and blue Shock Reducti...
A 36-inch household spirit level with a non-conductive Structo-Cast frame that will not scratch pain...
A small molded level for hanging pictures, mirrors, and checking appliances so the housing does not ...
A two-pack of flat 7-inch carpenter pencils with medium graphite that will not roll off a board. Joh...
The original 7-inch die-cast aluminum Speed Square, used as a try square, miter, saw guide, and prot...
The 12-inch Big 12 Speed Square is the longer household framing version of the die-cast aluminum lay...
A 12-inch forged gooseneck wrecking bar for prying, lifting, and pulling nails. Estwing lists this g...
A 36-inch forged gooseneck wrecking bar for prying, lifting, and pulling nails. Estwing lists this g...
A 24-inch Pro Series gooseneck wrecking bar with an angled chisel and a slotted nail puller. Estwing...
A 36-inch Pro Series gooseneck wrecking bar for pulling, prying, and straightening. Estwing lists th...
An 18-inch I-beam construction pry bar with a beveled nail slot and a reinforced rocking head. Estwi...
A 16-inch drop-forged 3-in-1 bar with a flat pry blade, 2.5-inch fulcrum, and nail-pulling wedge for...
A 14-inch hex line-up pry bar with a tapered aligning end and an angled chisel end, black oxide fini...
A 16-inch hex line-up pry bar with a tapered aligning end and an angled chisel end, black oxide fini...
A 20-inch hex line-up pry bar with a tapered aligning end and an angled chisel end, black oxide fini...
A 24-inch hex line-up pry bar with a tapered aligning end and an angled chisel end, black oxide fini...
A 38-inch hex line-up pry bar with a tapered aligning end and an angled chisel end, black oxide fini...
A 30-inch hex line-up pry bar with a tapered aligning end and an angled chisel end, black oxide fini...
The 420 is Channellock’s 9.5-inch original straight-jaw tongue-and-groove plier, forged from high-ca...
The 440 is the 12-inch original straight-jaw tongue-and-groove plier with a PermaLock fastener, unde...
The 460 is Channellock’s large 16.5-inch straight-jaw tongue-and-groove plier for bigger pipe and fi...
The 426 is the compact 6.5-inch straight-jaw tongue-and-groove plier in the original lineup, with a ...
The 442 uses V-jaws for more contact points on pipe and round stock, with a PermaLock fastener and l...
The 337 is a 7-inch high-leverage diagonal cutter with XLT rivet placement, laser heat-treated knife...
The 317 is an 8-inch long-nose plier with a narrow profile, crosshatch teeth, and a laser heat-treat...
The 369 is a 9.5-inch XLT lineman’s plier with round-nose jaws, a knife-and-anvil cutter rated for A...
The 610FR is an offset-right aviation snip that cuts 18-gauge cold-rolled steel and 22-gauge stainle...
Popular ambidextrous EDC folder with a 3.45-inch CPM-S30V drop-point blade and textured G10 handle, ...
Traditional single-blade slip-joint pocket knife with a Tru-Sharp stainless clip blade and synthetic...
Lightweight EDC folder with a 3.24-inch CPM-S30V drop-point blade and Grivory handle, engineered and...
Premium titanium-framelock EDC folder with a CPM MagnaCut drop-point blade and Chris Reeve's patente...
Compact version of the Para Military 2 with a 2.95-inch full-flat-ground CPM S45VN blade, G-10 handl...
Iconic lockback hunting/EDC folder with a 3.75-inch 420HC clip-point blade, ebony handle, and brass ...
Ken Onion-designed slim EDC folder with a 3-inch Sandvik 14C28N drop-point blade and SpeedSafe assis...
Tongue and groove pliers made in Meadville, Pennsylvania since 1886.
Multi-bit screwdriver and nut driver set. Manufactured in Lincolnshire, Illinois.
One-piece forged steel hammer with shock-reduction grip. Made in Rockford, Illinois since 1923.
18-in-1 stainless steel multi-tool. Manufactured in Portland, Oregon.
Professional 80-tooth flex head ratchet. Made in Kenosha, Wisconsin.
Professional-grade wrench set. Made in Barberton, Ohio.
We use cookies to improve your experience. By continuing to use this site, you agree to our Privacy Policy.
